Parasound Halo P6 tar over etter forforsterker-favoritten P5. Akkurat som P5 er det en avansert 2.1-kanals stereo forforsterker med DAC og hodetelefon forsterker som er designet for seriøs tokanals musikklytting, men er også meget enkelt å integrere i et surround hjemmekino system.
P6 er bygd etter meget strenge kvalitets og ytelseskrav som Parasound er kjent for. P6 er spekket med funksjonalitet som gjør den til en unik forforsterker som passer inn i et moderne anlegg hvor man blander stereo, surround, PC-avspilling, high-res formater osv.
P6 har innebygd ESS Sabre32 Reference DAC som via koaks, optisk håndterer samplinger helt opp til 192kHz . Asynkron USB 2.0 støtter PCM up to 384kHz/32-bit og DSD. Det finnes egen subwoofer utgang med separat volumkontroll og delefilter setting. RIAA forsterker for både MM, MC og MI pickup. Det finnes RCA og XLR inn og utgang. P6 har også innebygget en høykvalitets hodetelefonforsterker.
Bypass-inngangene brukes for å innlemme P6 inn et surround sound system. Dette gjør at du kan bruke din subwoofer(e) og stereo effektforsterker (eller to kanaler av en flerkanals forsterker) som driver venstre og høyre høyttalere for både stereo kilder koblet til P6 og som en del av surround systemet.
Nye egenskaper i forhold til P5
- ESS Sabre32 Reference DAC replaces the original Burr-Brown DAC
- USB input is now capable of DSD & 384kHz/32-bit PCM (up from 96Khz/24-bit)
- Burr Brown analog resistor ladder volume control
- Dimmable front panel volume display
- Upgraded USB receiver with “plug and play” operation with Windows 10
- An additional optical input (2 total)
- Ball bearing supported solid aluminum volume knob
- Programable default turn on volume setting
- Favorite volume memory with remote control button
- Increased phono stage gain for lower output cartridges
- Improved Left/Right channel separation and balance tracking
- Sand blasted metal end caps replace plastic end caps on the P 5
- Updated cosmetics with subtle gold highlights
Preamp and DAC Features
- ESS Sabre32 Reference DAC (ES9018K2M)
- Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit
- USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD
- Coax and optical inputs accept PCM up to 192kHz/24-bit
- Analog bass management with high & low pass crossovers
- Home theater bypass input for surround sound integration
- Front panel subwoofer level control
- Dedicated high current headphone amplifier (TI TPA6120)
- Phono input for MM, MC and MI with 100 Ω or 47k Ω load
- Front panel Aux input with automatic +12 dB gain stage
- 5 pairs RCA line level Analog inputs
- 1 pair XLR balanced Analog input
- Balanced XLR and RCA left and right preamp outputs
- 1 balanced XLR and 2 RCA subwoofer outputs
- Bass & treble controls with relay bypass from remote or front panel
- Rear panel IR input and IR loop output jacks
- 12 Volt trigger output
- Back-lit remote control with discrete buttons
- 0.5w standby power consumption meets Energy Star & EU specs
Spesifikasjoner
- 10 Hz – 100 kHz, +0/-3 dB
- 20 Hz – 20 kHz, +0/-0.5 dB
- MM: 38 dB / 47 k Ω
- MC: 52 dB / 47 k Ω or 100 Ω
- Unbalanced: 24 k Ω
- Balanced: 100 k Ω per leg
- Unbalanced: 100 Ω
- Balanced: 470 Ω per leg
- 12 dB per octave
- USB: up to 384 kHz / 32-bit PCM
- DSD Native: DSD 64, DSD 128, DSD 256
- DSD over PCM (DoP) at 384 kHz
- Coax/Optical: up to 192 kHz / 24-bit PCM
- ESS Sabre32 Reference ES9018K2M
384 kHz / 32-bit
- Savitech SA9227, 384 kHz / 32-bit
- Texas Instruments TPA6120A
- Output Impedance 10 ohms
- Width: 17-1/4” (437 mm)
- Depth: 15” (381 mm)
- Depth, with cables 17” (432 mm)
- Height, with feet: 4-1/8” (105 mm)
- Height, without feet: 3-1/2” (89 mm), 2U
- 14 lb. (6.3 kg)
- 21 lb. (9.5 kg)